Skid Loader Attachments

Skid loader, skid steer, skid steer loader — same machine, three names. Around Central PA most people say skid loader, so that is what we call it too. This page explains how the mounts work, which one your machine has, and what actually fits it. The attachments we carry are listed further down.

Will It Fit My Skid Loader?

Almost everything comes down to which mounting plate is on the front of your machine. There are four in common use, and they are not interchangeable with each other.

Machine	Mount	What that means
Full size skid loader / skid steer	Universal quick attach	The industry standard plate, sometimes called the Bobcat-style or ISO plate. Two levers on the machine drop pins through a matching frame on the back of the attachment. Nearly every full size skid steer built in the last 25 years has it, regardless of brand.
Mini skid loader / compact utility loader	Common interface	The mini-machine standard, often called the Dingo mount after the Toro machine that popularised it. Ditch Witch, Vermeer and most compact utility loaders use it as well. It is a different design from universal quick attach, not a smaller copy of it, and the two do not interchange.
Bobcat MT series	Bobcat MT	Bobcat’s own pattern on its MT mini track loaders. It looks like a scaled-down universal quick attach — same shape, same idea, just smaller — and nothing like a common interface plate. Because it is its own size, neither a full size universal attachment nor a common interface one will fit it.
Tractor front end loader	Euro / global hitch	The European standard, found on most tractor front end loaders. Two hooks lift over a top bar and two pins lock underneath. It is a different system from skid steer quick attach entirely — crossing between the two takes an adapter.

Hydraulic flow

Attachments that run off the machine’s auxiliary hydraulics also need the right flow and pressure. There is no rule of thumb worth quoting here — it is different for every attachment, and a number that is right for one is wrong for the next. Where we have the figure it is in the specifications table on the product page. Your machine’s output is on its spec sheet, and usually on a decal in the cab. Send us the model and we will tell you whether it will run what you are looking at.

Full Size Skid Loader Attachments

Everything here runs the universal quick attach plate and fits any standard-flow skid loader or skid steer. The one full size item we sell that is not universal quick attach is the 48" Euro mount pallet forks, built for tractor front end loaders.

• 72" brush cutter — heavy brush, saplings, briars and overgrown fence line. Ships with a second full set of blades.
• 72" rototiller — 68" working width, 7" depth, 32 replaceable blades.
• Auger kit with 14", 12" and 6" bits — sign posts through structural piers, nothing else to buy.
• Concrete breaker — slab, footer, sidewalk, foundation, frost-hard ground and rock.
• 1/2 yard concrete mixer bucket — load, mix, drive to the form, pour out of the bucket.
• Tree and post puller — pulls by the root. No stump, no hole, no grinding later.
• 72" no-till drill — food plots, pasture renovation and cover crop in one pass.

See all full size skid loader attachments →

Mini Skid Loader Attachments

For mini skid loaders and compact utility loaders on the common interface mount — Toro Dingo, Ditch Witch, Vermeer and most compact utility loaders. Bobcat MT machines run their own mount, so they need attachments built for the MT pattern; the MT bucket below is one.

• 48" 4-in-1 bucket and 39" 4-in-1 bucket — dig, doze, grab and grade without swapping.
• 44" grapple bucket — independent top clamps for brush, rock and demo debris.
• 12" auger / post hole digger — the size most fence and deck work calls for.
• Concrete mixer bucket — wired and ready to run off your aux hydraulics.
• Trench filler — a spiral auger that closes a ditch in one pass.
• 48" Bobcat MT bucket — built for the Bobcat MT mount, no adapter plate.

See all mini skid loader attachments →

Building Your Own? We Sell the Plates

Universal quick attach weld-on plates in 3/16", 1/4" and 1/2", plus common interface plates for mini machines. Weld one to something you built in the shop and it mounts like a factory attachment.

What It Costs to Get It There

• LTL freight nationwide — quoted live at checkout from your delivery address, priced as residential delivery with a liftgate so the truck puts the pallet on the ground for you.
• Our own truck across Pennsylvania, Ohio, Maryland, Delaware, Virginia and West Virginia — free inside 30 miles, and past that billed on the full distance per loaded mile. We will go further if the delivery cost works for you.
• Pick up at the yard in McClure, PA — free, and you can choose it right at checkout. Call ahead and we will have it pulled out and ready.

Why Buy From Us

Professional spec at a fair price. We run low overhead and price accordingly, and we would rather sell you the right attachment once than the wrong one twice.

Prices are public on every product. Freight is a real carrier rate you see before you pay. And there is an actual yard on Route 522 in McClure you can drive to and look the equipment over before you buy.

We sell to contractors, farmers, concrete crews, landscapers and homeowners alike — no account, no minimum. Our own truck covers Pennsylvania, Ohio, Maryland, Delaware, Virginia and West Virginia, and LTL freight covers the rest of the lower 48. More about us →